Nowadays, it’s been quite popular to expand your Windows screen by using two or more monitors. DisplayLink products is the common choice for users. To make DisplayLink USB graphics work compatibly with Windows 10, it’s advised that you’d better keep your DisplayLink driver up-to-date.
Here in this article, we will be showing you how to download the latest DisplayLink diveron your Windows 10.
Drivers are available via Windows Update, direct download latest drive from DisplayLink website, or Driver Installation CD. Super strong certified GPU performance HDMI Output - 19pin FHD 1080P supports resolutions up to 2048 × 1152, 5Gb/s DVI Output - 29pin HD 720P supports resolutions up to 1920 × 1080 VGA Output (through DVI to VGA. DisplayLink is now part of Synaptics Inc. Visit synaptics.com and follow on. Driver software download. To get a smooth start together with our video kits you will need to have the DisplayLink driver installed on your laptop. The driver for which is already on your computer if you have Windows 10 (1607) Anniversary Update or later. Drivers for other operating systems can be found here: Windows MacOS Linux. Way 2: Update your DisplayLink Driver automatically (Recommended) Driver Easy applies to your Windows 10 and other common versions of Windows, like Windows 7, 8. It will automatically recognize your system and find the correct drivers for it.
Displaylink Others Driver Download For Windows 10 32 Bit
A. It requires the administrator privileges to install a new device driver on your Windows computer. So make sure you log in your Windows with an administrator account.
B. You should always keep your printer driver up-to-date to enable it work fine.
Way 1. Download the driver from the official DisplayLink website
You can choose to download the most recent driver for your Displaylink directly from the official HP website.
1) Go to theofficial Displaylink webiste.
2) Locate the driver download page.
3) Select your operating system. It will takes you to the download page then.
4) Click the Download next to the most recent version of the driver file.
5) When it completes downloading, double-click the downloaded .exe file to follow the on-screen instructions to install the driver on your Windows 10.
6) Restart your Windows computer to make the new driver take effect.
It’s direct and straight-forward to download the driver from the manufacturer’s website though, it requires your time, patience and the computer technique. If you are not a computer savvy or, you want to do it much faster to save much more time, instead, you can update your HP Envy 5530 driver automatically withDriver Easy. Follow the next way then.
Way 2: Update your DisplayLink Driver automatically (Recommended)
Driver Easy applies to your Windows 10 and other common versions of Windows, like Windows 7, 8. It will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.
You can update your drivers automatically with either theFREEor theProversion of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):
1)Downloadand install Driver Easy.
Download Windows 10
2) Run Driver Easy and click theScan Nowbutton. Driver Easy will then scan your computer and detect any problem drivers.
3) Click the Update button next to your flagged Displaylink device driver to automatically download and install the correct version of this driver (you can do this with the FREE version).
Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).
4) Restart your Windows computer to make the new driver take effect.
DisplayLink dynadock and USB Monitor driver V7.9 M3 for Windows 7, 8x, and 10
Displaylink Others Driver Download For Windows 10 Bit
| Release Date: | Version: |
|---|---|
| 2012-01-04 | R6.2M1 |
| 2017-06-29 | 8.2 |
| 2015-08-31 | 7.9.561.0 |
| 2015-08-03 | 7.9.421.0 |
| 2015-06-22 | 7.8.63131.0 |
| 2015-03-24 | 7.7.60584.0 |
| 2015-01-13 | 7.7.59540.0 |
| 2014-12-01 | 7.7.59116.0 |
| 2014-07-28 | 7.6.56443.0 |
| 2014-06-09 | 7.6.55705.0 |
| 2014-04-28 | 7.6.55102.0 |
| 2014-03-31 | 7.5.54609.0 |
| 2014-02-28 | 7.5.54080.0 |
| 2014-02-24 | 7.5.52972.0 |
| 2013-12-09 | 7.5.52889.0 |
| 2013-10-14 | 7.4.51587.0 |
| 2013-08-26 | 7.4.50444.0 |
| 2013-07-22 | 7.3.49122.0 |
| 2013-05-20 | 7.2.47873.0 |
| 2013-04-22 | 7.2.47419.0 |
| 2013-04-08 | 7.2 M0 |
| 2013-02-12 | 7.1M1 |
| 2013-01-22 | 7.1 M0 |
| 2012-12-17 | 7.0 M3 |
| 2012-08-13 | 6.3M1 |
| 2012-08-06 | 6.3M1 |
| 2012-01-20 | 6.2.37116.0 |
| 2009-01-09 | 4.5.14974.0 |
| dynadock PA3541U-2PRP dynadock VGA |
| dynadock PA3542U-2PRP dynadock DVI |
| dynadock PA3575U-1PRP dynadock U |
| dynadock PA3686U-1SET dynadock wireless |
| dynadock PA3778U-1PRP dynadock V |
| dynadock PA3927U-1PRP dynadock U3.0 |
| dynadock PA5082U-1PRP dynadock V3.0 |
| dynadock PA5217U-1PRP dynadock 4k |
| External Monitor PA3923U-1LC3 USB Monitor |
| External Monitor PA3923U-2LC3 USB Monitor |
| External Monitor PA5022U-1LC3 USB Monitor |
- Package
- WinZIP self-installing ZIP file. Can also be unZIPped using PKUnZip 2.04g or equivalent.
- Description
ReleaseNote
DisplayLink Software Release: External Release Note
Software Package: DisplayLink Graphics
Product Version: 7.9.703.0
Product Date: 22nd October 2015
DisplayLink Core Software Version: 7.9.630.0
DisplayLink Core Software Date: 17th October 2015
DisplayLink DL-3xx0 / DL-5xx0 Firmware Version: 8.12.19.75291
DisplayLink DL-41xx Firmware Version: 8.12.19.75291
A. Introduction
This is the 7.9M3, the second public maintenance release of 7.9. It has been put
through a full system test and is suitable for deployment to end-users.
DisplayLink Software Release 7.9 delivers the following features:
- Windows 10 support
This release is for Windows 7 and later. Windows XP SP2 and Vista are supported
by earlier versions of the DisplayLink software:
http://www.displaylink.com/downloads
For further support and information about DisplayLink software, please visit
http://support.displaylink.com/
A1. Important notes about DL-3xx0, DL-41xx and DL-5xx0 Firmware
This software release contains an embedded firmware image.
DL-3xxx/DL-41xx/DL-5xxx devices will be automatically upgraded with this
firmware upon connection.
B. Contents
A. Introduction
A1. Important notes about DL-3xxx, DL-41xx and DL-5xxx Firmware
B. Contents
C. New features
C1. Issues fixed since R7.8 release (7.8.63104.0)
D. How to Install and Use
E. Supported Operating Systems
F. PC Recommended Specifications
G. Language Support
H. Supported Hardware
I. Known Issues and Limitations
C. New features
DisplayLink Software Release R7.9M3 delivers the following improvements:
- Latest release for Windows 10 Threshold 2 update, due in November
- Critical bug fixes
C1. Issues fixed since R7.8 release (7.8.63104.0)
-------------------------------------------------
Issues fixed in 7.9 M3 (7.9.630.0)
---------------------------------------------------------
- The DisplayLink device could remain in device manager for up to 30 seconds
after disconnecting the USB cable. This problem was only visible on Windows
7 with an Intel USB 3.0 host controller. (20509)
- DisplayLink monitors can stop working with the latest (October 2015 or later)
primary card graphic drivers on Windows 10. (20717)
- The Start button or Microsoft apps might fail to operate on Windows 10 with
DisplayLink software installed. (20160)
- Installation of DisplayLink software is not successful if 8.3 short
file names are disabled. This was a regression in v7.8 software (20595)
- Monitors attached to DisplayLink device might briefly show a corrupted
desktop image during mode changes. (20254, 20441)
- The resolution 2560x1440 was not be available for some monitors with
invalid EDID. (20390)
- 'Fit to TV' compensation feature was not available on Windows 10. (20107)
- Sometimes a transient corruption can be visible on DisplayLink monitor during
replugging USB cable if the monitor is connected to DisplayPort. (19704)
- On some monitors connected to DisplayLink device via HDMI, the audio stream
can be distorted or there can be no audio available. (20417, 20510)
- The DisplayLink installer did not show an error when trying to install on Windows
Vista. (20386)
Issues fixed in 7.9 M2 (7.9.478.0)
---------------------------------------------------------
- On some platforms re-plugging the DisplayLink device from USB port
can result in BSOD. (20235)
- On some systems incorrect message stating 'cannot install on this
operating system' can be seen. (20406)
- On some systems, the 'Software installation ended prematurely message' can
be seen. (20422)
- Wake On LAN may be not work as expected on Windows 7 if a dock is connected
to USB 3.0 port. (20240)
- On Windows 10, the monitor number is missing from the DisplayLink UI in the
system tray when two monitors are connected to DisplayLink device. (19697)
- Some third party applications (found with ATIeRecord) can show a Windows
Event error after multiple restarts of the PC with DisplayLink software
installed. (19871)
- DisplayLink software can occasionally fail to upgrade from older release
when downloaded from Windows Update. (20056)
- Landscape mode might is not available for DL-41xx equipped with tilt sensor
on Windows 10. (20106)
- The On Screen Display is not available for DL-41xx devices on Windows 10.
(20109, 20345)
- Corporate software (MSI files) could claim to be from an Invalid Publisher.
(20171)
- On some Intel Atom platforms on Windows 10 a primary monitor can be blank
after DisplayLink Software is installed and connecting DisplayLink monitor.
(20233)
Issues fixed in 7.9 Release (7.9.296.0)
----------------------------------------
- DisplayLink User Interface opens the incorrect display settings window
when selecting 'Video Setup'. (19974)
- Miracast fails to operate when DisplayLink software is installed. (19759)
- Poor network performance when the DisplayLink network interface is connected
to some Huawei LTE routers. (19858)
D. How to Install and use
Please find detailed guidance and information about how to install and use this
software, see the articles on the DisplayLink support site:
http://support.displaylink.com/knowledgebase/topics/78161
Information on corporate deployment can be found here:
http://support.displaylink.com/knowledgebase/topics/92322
Corporations can download the MSI installation files from:
http://www.displaylink.com/corporateinstall
For further support and information about DisplayLink software, please visit
http://support.displaylink.com
E. Supported Operating Systems
This release can be installed on the following operating systems:
- Windows 7 (32-bit and 64-bit editions)
- Windows 8 (32-bit and 64-bit editions)
- Windows 8.1 Update 2014 (32-bit and 64-bit editions)
- Windows 10 (32-bit and 64-bit editions)
Windows XP SP2 and Vista are supported by older versions of the DisplayLink
software: http://www.displaylink.com/downloads
F. PC Recommended Specifications
Please find detailed information about the minimum and recommended
specifications to run this software in this article:
http://support.displaylink.com/knowledgebase/articles/524951
G. Language Support
Please find the complete list of languages supported by this software in
this article: http://support.displaylink.com/knowledgebase/articles/630820
H. Supported Hardware
Devices supported:
- DL-5500 / DL-5700 / DL-5900 / DL-5910
- DL-41xx
- DL-3100 / DL-3500 / DL-3700 / DL-3900 / DL-3950
- DL115 / DL125 / DL165 / DL195
- DL120 / DL160
I. Known Issues and Limitations
System behaviour with DisplayLink attached screens has been well tested.
Testing covers plug/unplug, mode changes, playing video, hibernate,
sleep/standby, multiple users, different user rights, attached screen as
primary screen, attached screen as only screen, and other aspects.
For information about specific issues please see the DisplayLink support
knowledgebase: http://www.displaylink.com/support/knowledgebase.php